TGOJ Gb 95

[vovven47]

1. Nytt versionsnummer
2. Synkronisering ångljud och ångpuffar
3. ALLTID ångpuffar uppför backe större än 10 promille.
Kunde tidigare omotiverat stoppa under större stigningar.
4. Några fler rök scener.
5. tuff start. Kolla tidigare presenterad video snutt.
Obs. Kan ta upp till en minut innan eldaren börjar kola. Vänta sedan ytterligare ungefär en minut innan
du startar tåget.
+ Inget flimmer

OBS! Tendern ombyggd
1. Ny tender med STOR vattentank enligt TGOJ "standard" efter påpekande från ångloksexperten.

Nedladdas från:
http://jocomms.webs.com

[vovven47]

Ett ånglok som länge legat halvfärdigt, men nu äntligen blivit klart för nedladdning.

TGOJ loket har fått följande nya egenskaper:
1. Många nya detaljer
2. Välj mellan TGOJ Gb 95 eller 96 i Surveyor mode.
3. Animerade dörrar/fönster.
Styrs av tang.komb. "alt-v" för vänster sida resp. "alt-h" för
höger sida.
Ni kan själva se hur ordningen dörrar/fönster öppnas/stängs fungerar.
"alt-f" som öppnar/stänger lokets fronfönster.
Gäller alltså att ni definierat upp min kontroll fil.
Har ni gjort detta tidigare med version 6 så behövs följande inte göras om:
http://www.e-buzz.se/forum/showthread.php?t=37106

4. Åssa smörjpump.
5. Ny buffert texture.
6. "Mindre cylinder läckage"


I övrigt samma egenskaper som förra TGOJ Gb loket.














Observera att bilden tagen innan korrigeringen av cylinder läckage:



Nedladdnings länk för lok,tender och hytt:
https://www.mediafire.com/file/smc8w...03_05.cdp/file

[tedje]

Hello everyone,
I downloaded TGOJ_Gb_95_2019_03_05, but I get this error message;

* Vallidating <kuid2:448495:1252:1>
* MeshResource:Loadresource><NULL>arc:fld:$(local)ha sh-DE||kuid2 448495 1252 1.tzar
*loading mesh asset_body/asset_body.im
* VE166: 25 combined chunks (of 30 source) in. im file:
* VE82: Individual mesh files are not supported for traincar assets. Upgrade 'asset_body.im’ to a.LM file.
* MeshResource:Loadresource><NULL>arc:fld :$(local)hash-DE||kuid2 448495 1252 1.tzarc
* Loading mesh asset_body/asset_body_low.im
* VE166: 19 combined chunks (of 22 source) in. im file:
* Loading mesh asset_body/asset_body.im
* VE166: 25 combined chunks (of 30 source) in. im file:
* MeshResource:Loadresource><NULL>arc:fld:$(local)ha sh-DE ||kuid2 448495 1252 1.tzarc
* Loading mesh asset_body/asset_body_low.im
* VE166: 19 combined chunks (of 22 source) in. im file:
* VE82: Individual mesh files are not supported for traincar assets. Upgrade 'asset_body_low.im to a.LM file.
* VE82: Individual mesh files are not supported for traincar assets. Upgrade 'asset_body/kortpoppel.im to a.LM file.
* VE82: Individual mesh files are not supported for traincar assets. Upgrade 'asset_body/plogarbak.im to a.LM file.
* VE20: Mesh 'load' references in 'queues/load-coal 'was not found within the mesh table

Can someone tell me how to fix this error report.

greetings,
Tedje

[vovven47]

Ursprungligen postat av tedje

Hello everyone,
I downloaded TGOJ_Gb_95_2019_03_05, but I get this error message;

* Vallidating <kuid2:448495:1252:1>
* MeshResource:Loadresource><NULL>arc:fld:$(local)ha sh-DE||kuid2 448495 1252 1.tzar
*loading mesh asset_body/asset_body.im
* VE166: 25 combined chunks (of 30 source) in. im file:
* VE82: Individual mesh files are not supported for traincar assets. Upgrade 'asset_body.im’ to a.LM file.
* MeshResource:Loadresource><NULL>arc:fld :$(local)hash-DE||kuid2 448495 1252 1.tzarc
* Loading mesh asset_body/asset_body_low.im
* VE166: 19 combined chunks (of 22 source) in. im file:
* Loading mesh asset_body/asset_body.im
* VE166: 25 combined chunks (of 30 source) in. im file:
* MeshResource:Loadresource><NULL>arc:fld:$(local)ha sh-DE ||kuid2 448495 1252 1.tzarc
* Loading mesh asset_body/asset_body_low.im
* VE166: 19 combined chunks (of 22 source) in. im file:
* VE82: Individual mesh files are not supported for traincar assets. Upgrade 'asset_body_low.im to a.LM file.
* VE82: Individual mesh files are not supported for traincar assets. Upgrade 'asset_body/kortpoppel.im to a.LM file.
* VE82: Individual mesh files are not supported for traincar assets. Upgrade 'asset_body/plogarbak.im to a.LM file.
* VE20: Mesh 'load' references in 'queues/load-coal 'was not found within the mesh table

Can someone tell me how to fix this error report.

greetings,
Tedje

It seems to be the tender, that has problem.
Not the loco.

It confuses me that LOD messages are shown.
If LOD problem, the loco should also have same error.

If you study my config file for tender, you will find out that I have implemented LOD feature in exactly same way as the Gb95 loco.

Extracts from my tender config file:
default
{
mesh "asset_body/asset_body.lm"
auto-create 1
animation-loop-speed 1


plogarbak
{
mesh "asset_body/plogarbak.lm"
auto-create 1
att "a.plogarbak"
att-parent "default"
}

VE20: Mesh 'load' references in 'queues/load-coal 'was not found within the mesh table

Extracted from my config file:
load-coal
{
size 7000
initial-count 7000
product-kuid <kuid:44179:60013>
animated-mesh "load"

attachment-points
{
0 "a.load"
}

allowed-products
{
0 <kuid:44179:60013>
}
}

Folder asset_body must contain:
load.im
load.kin

Can you find these 2 files in above folder?


Anyway, which messages are red-marked?
Yellow means only warning.


Can you open the tender config file?
Does the file look OK?

Are you using TANE or TRS19?

Another idea is to re-download the loco from Mediafire again.

[Bengan]

Installerade igår kväll.

Ingen gul eller röd varning för mig.

[tedje]

Hello vovven,

I have removed the tender and reinstalled it, now everything works. I have tane sp3

greetings tedje