STL Animerade Godsvagnar ... - Svenska 3D-Tåg

lan · 2014-09-07, 09:13

The bogey is the Gkks bogey and does not interfer with any updated items.
The ATC-balis might is an old one that is replaced by vers 3.

I shall look at Shimmns!

Bengan · 2014-09-07, 12:31

Så tar vi en uppsättning av FRUKTNORLIN som texturegrupp.

Texturegruppen på MediaFire i länken nedan

https://www.mediafire.com/?zko88e3o8fqjuth

och en klonad vagn till texturegruppen längst ner här.

dampfloker · 2014-09-07, 15:14

Hello!

When I install "STL Gkks bogey.cdp", there is the "STL 3.1 ATavla ATC-balis lodrät b1" - and that is no bogey!

Regards
Dampfloker

lan · 2014-09-07, 17:38

That is a very old version and you should replace it, and install the new.
The only items supported are thoose in this post:

http://www.e-buzz.se/forum/showthread.php?t=34126

dampfloker · 2014-09-07, 21:11

But there is no "STL 3.1 ATavla ATC-balis lodrät b1"...
Which of that DLs in the thread should I use?

lan · 2014-09-08, 11:15

Citat:

Ursprungligen postat av dampfloker

But there is no "STL 3.1 ATavla ATC-balis lodrät b1"...
Which of that DLs in the thread should I use?

In vers. 3 there is only one A-tavla ATC Balis which is can be mounted in many different ways by the property window. What you have is a very early beta.
If you've used it in abundance on a route I suggest you keep it and clone the gkks-boggi and change the grf-config. But the choise is yours.

dampfloker · 2014-09-08, 17:03

Sorry - I really do not understand, what I should do ?!?!?
...now I have simply changed the assigned objekt into bogey kuid:67375:101392.
And now it works well.
The other way was too complicated for me....

2014-09-07, 09:13	#1
lan Veteran Reg.datum: Nov 2001 Ort: Onsala, , Sweden. Inlägg: 8 149	The bogey is the Gkks bogey and does not interfer with any updated items. The ATC-balis might is an old one that is replaced by vers 3. I shall look at Shimmns! __________________ *"Det är kanske för sent att lära sig nåt nytt" - Bengan travesti* LAn

2014-09-07, 17:38	#4
lan Veteran Reg.datum: Nov 2001 Ort: Onsala, , Sweden. Inlägg: 8 149	That is a very old version and you should replace it, and install the new. The only items supported are thoose in this post: http://www.e-buzz.se/forum/showthread.php?t=34126 __________________ *"Det är kanske för sent att lära sig nåt nytt" - Bengan travesti* LAn

2014-09-07, 21:11	#5
dampfloker Medlem Reg.datum: Jun 2010 Ort: germany Inlägg: 30	But there is no "STL 3.1 ATavla ATC-balis lodrät b1"... Which of that DLs in the thread should I use? Senast redigerad av dampfloker den 2014-09-08 klockan 02:58.

Ämnesverktyg
Visa utskriftsvänlig version E-posta den här sidan
Visningsalternativ
Växla till linjär visning Hybrid-visning Växla till trådad visning

2014-09-07, 15:14	#3
dampfloker Medlem Reg.datum: Jun 2010 Ort: germany Inlägg: 30	Hello! When I install "STL Gkks bogey.cdp", there is the "STL 3.1 ATavla ATC-balis lodrät b1" - and that is no bogey! Regards Dampfloker

2014-09-08, 17:03	#7
dampfloker Medlem Reg.datum: Jun 2010 Ort: germany Inlägg: 30	Sorry - I really do not understand, what I should do ?!?!? ...now I have simply changed the assigned objekt into bogey kuid:67375:101392. And now it works well. The other way was too complicated for me....