Ånglok SJ S1 1921 och SJ S1 1923

[vovven47]

Ursprungligen postat av jaggi

I am using TANE SP3 and I am not able to select some items in the options, cylinder or ejector utlopp, elda mer, tuff start for example. So I tried to find whats wrong and while checking compilation of the steam_s1_1921.gse it shows - <NULL> : Could not read file msmotorvehicle.gs and latest version of STL library includes only msmotorvehicle.gse so I guessed it is the cause of some scripted features unavailable for me. TRS makes no difference between gs and gse file when calling the script from another script?

Below is the contents of my STL library:


As can be seen there is only one msmotorvehicle.gse.
And I have no problem with my locos.

Have you tested with any of my other steam locos ?
If so, same problem => re-download the STL library.

No, the other steam locos are working => re-download the S1 loco (Latest version)

[jaggi]

Your steam_s1_1921.gse script includes this line:
include "msmotorvehicle.gs"
Am I right? May I ask You to be so kind to change it to
include "msmotorvehicle.gse"
for me to test, if this is making troubles in my TANE?
Thanks a lot.

[vovven47]

I had saved TANE SP3 (94916) on USB memory, so I did a quick test.
S1 1921 working:




I think you do not have the latest version of the STL library.
Download it and test.

[jaggi]

I have latest STL library installed.
Your steam_s1_1921.gse script includes this line:
include "msmotorvehicle.gs"
STL library includes only msmotorvehicle.gse
Since You can't help me to test it by making modification which takes 5secs,
I solved it by deleting Your loco.
Thank You for support anyway.

[Eric1200]

Jeg her set den Ægte vare. i Flensburg 2013.

[Hawk]

Har problem.
Har försökt lägga in SJ S1 flera gånger, men det går inte.
Vad gör jag för fel ?
Varför blir loken röda ?

[vovven47]

Ursprungligen postat av Hawk

Har problem.
Har försökt lägga in SJ S1 flera gånger, men det går inte.
Vad gör jag för fel ?
Varför blir loken röda ?

För att kunna hjälpa dig, gör så här:

1. Markera S1 1921 med vänster musknapp.
2. Tryck med höger musknapp över loket och du får:



Tryck med vänster musknapp rödmarkerade fältet "list dependencies"
Nu kan du se vilka dependencies som fattas.
Eller du kan visa din resulterande bild på vårt forum, så kan vi hjälpa dig!
Min bild: