Community-ware - Finns det intresse? - Sidan 17 - Svenska 3D-Tåg

Tåg-Lasse · 2014-10-20, 17:39

Tack, nu funkar det! Trodde att jag hade installerat filen men hade nog bara laddat ner den...

IORE2000 · 2014-10-22, 15:41

hello,

unfortunately I can not speak Swedish and my englsich is also not very good.
I wanted to buy the community-ware Rc, but unfortunately it does not work. It comes following error message:

Something went wrong

An automatic message has been sent to our technicians and theywill as soon as Possible investigate the cause.

Error message: Could not wrap requst. Invalid call to Payson: Invalid parameter (email sender)

Please verify your parameters did werewolf sent accor ding to the api-documentation.
Contact Payson Support

Can you help me?

many thanks
IORE2000

dx5137 · 2015-01-07, 04:23

Hi there

Swedish is not my native tongue and google translate is giving mixed results. This is also my 1st post!

How do I purchase the Rc loco and what is the cost? One link I found was €150 which seems a little step.

Any help appreciated.

Cheers, Paul

Henrik · 2015-01-07, 05:36

Hello, and welcome to the forum!

The RC loco cost 14 pound/14 euro and can be bought from Members area - Översikt produkter - Köp nu!

After payment you have to download four files and also this one if you have TS2015

http://www.klemund.de/RailSimulator/...S2013_v3.0.rar

Rc1-1007 · 2015-02-11, 21:09

Hur mkt skulle det kosta isf. Har ni något cirkapris eller pristaxa?

Mvh
Erik Widenfalk

Henrik · 2015-02-11, 21:17

Hur mycket RC-loket kostar att köpa? Den kostar 150 kronor

Rc1-1007 · 2015-02-12, 22:12

jag har köpt och laddat ned den. men nu står det att varje fil är sönder och inte går att installera. blir så förbannad när man betalat och det inte funkar. någon som vet hur man fixar.

TS 2015

mikban · 2015-02-12, 22:23

Hej Erik!

Om någon ska ha en chans att hjälpa dig är det en bra början om du berättar vilket felmeddelande du har fått, om du kan ladda upp ett screenshot vore det också bra.

Ingen anledning att bli förbannad, det funkar ju hos andra, så det lär säkerligen också gå att lösa hos dig

Henrik · 2015-02-12, 23:08

Har du laddat ned denna fil också?
http://www.klemund.de/RailSimulator/...S2013_v3.0.rar

Rc1-1007 · 2015-02-15, 14:22

Verkar funka nu.

Dock så har Rc5 6 7 fel hytt. Jag saknar också fler Rc2 och Rc3 i GC och SJ målningar ev. Rush rail. Annars hade det varit toppen! Någon som vet hur man ändrar nummerserier etc. Så att man kan få in t.ex 1166 och 1303 i spelet?

Fantastiskt välgjorda modeller! :-)

schweinchen · 2015-03-16, 18:14

I can't buy this modell because I'm getting everytime an error.
I tried it with different mail addresses, because of this error. PNs to Fredrik were not answered.

schweinchen · 2015-03-17, 15:28

Ok, I get it to work. no worries

schweinchen · 2015-03-27, 10:08

Is there still any development on the loco?

I bought it and I'm very disappointed!
The modell is really great but there are so many letdowns..

The cab is the worst I've seen so far. Bad textures and not much interaction possible.
The Rc1 drives nearly 200km/h.
In Rc6 I can't even look outside the side windows.
The pantographs raises and lowers way too fast.
The acceleration seems also to high.

I know this is made by fans in their freetime, but this is the most expensive loco I bought so far and I wouldn't recommend it for others.
There are so many freeware locos that are better than most of the payware.
And this community-ware I consider as a payware for this price.

Totte · 2015-03-27, 12:00

Hi!
Going to tell you a little about the RC set. The locomotive was built by a skilled civil engineer and took charge you (how much I do not know) of Frederick and in addition is not fully repaid.
The cab was made by newS free. If it gets better update I have no idea.

Google translation

Hej!
Ska berätta lite om RC:n. Loket byggdes av en skicklig civilingenjör och tog betalt (hur mycket vet jag inte) av Fredrik och dessutom är inte helt återbetalda.
Hytten gjordes av newS gratis. Om det blir bättre uppdatering har jag ingen aning om.

schweinchen · 2015-03-27, 15:31

I know that already about the engineer.

I really don't want to sound unrespectful. I love that loco and I want to support your project. I also respect newS' work and are looking forward to his route.
Nevertheless as a "customer" I have expectation and after the buy I'm disappointed about this product.
After 6 years of production I expected a little more. If there were pictures of the cab to see before bying maybe I hadn't bought this one.

At least the key facts should be right, I think. (max. speed)

2014-10-22, 15:41	#242
IORE2000 Medlem Reg.datum: Jan 2014 Inlägg: 1	hello, unfortunately I can not speak Swedish and my englsich is also not very good. I wanted to buy the community-ware Rc, but unfortunately it does not work. It comes following error message: Something went wrong An automatic message has been sent to our technicians and theywill as soon as Possible investigate the cause. Error message: Could not wrap requst. Invalid call to Payson: Invalid parameter (email sender) Please verify your parameters did werewolf sent accor ding to the api-documentation. Contact Payson Support Can you help me? many thanks IORE2000 Senast redigerad av IORE2000 den 2014-10-22 klockan 15:44.

2015-01-07, 04:23	#243
dx5137 Medlem Reg.datum: Jun 2014 Ort: Phnom Penh Inlägg: 1	Rc loco purchase Hi there Swedish is not my native tongue and google translate is giving mixed results. This is also my 1st post! How do I purchase the Rc loco and what is the cost? One link I found was €150 which seems a little step. Any help appreciated. Cheers, Paul

2015-03-27, 10:08	#253
schweinchen Medlem Reg.datum: Sep 2014 Inlägg: 14	Disappointment Is there still any development on the loco? I bought it and I'm very disappointed! The modell is really great but there are so many letdowns.. The cab is the worst I've seen so far. Bad textures and not much interaction possible. The Rc1 drives nearly 200km/h. In Rc6 I can't even look outside the side windows. The pantographs raises and lowers way too fast. The acceleration seems also to high. I know this is made by fans in their freetime, but this is the most expensive loco I bought so far and I wouldn't recommend it for others. There are so many freeware locos that are better than most of the payware. And this community-ware I consider as a payware for this price.

2015-03-27, 12:00	#254
Totte Hedersmedlem Reg.datum: Mar 2002 Ort: Trollhättan Inlägg: 9 802	Hi! Going to tell you a little about the RC set. The locomotive was built by a skilled civil engineer and took charge you (how much I do not know) of Frederick and in addition is not fully repaid. The cab was made by newS free. If it gets better update I have no idea. Google translation Hej! Ska berätta lite om RC:n. Loket byggdes av en skicklig civilingenjör och tog betalt (hur mycket vet jag inte) av Fredrik och dessutom är inte helt återbetalda. Hytten gjordes av newS gratis. Om det blir bättre uppdatering har jag ingen aning om. __________________ MVH TOTTE BanByggarna MSTS Rutt Trollhattan 2 RW-Trollhättan och Bergensbanen Beta Bygger RW-Trollhättan Bygger RW-Bergensbanen newS downloadsida Facebook Trainsimulator Sverige Facebook Trainsimulator Norge Senast redigerad av Totte den 2015-03-27 klockan 12:05.

2014-10-20, 17:39	#241
Tåg-Lasse Medlem Reg.datum: Oct 2014 Inlägg: 8	Tack, nu funkar det! Trodde att jag hade installerat filen men hade nog bara laddat ner den...

2015-01-07, 05:36	#244
Henrik Medlem Reg.datum: Aug 2001 Ort: Stockholm Inlägg: 420	Hello, and welcome to the forum! The RC loco cost 14 pound/14 euro and can be bought from Members area - Översikt produkter - Köp nu! After payment you have to download four files and also this one if you have TS2015 http://www.klemund.de/RailSimulator/...S2013_v3.0.rar

2015-02-11, 21:09	#245
Rc1-1007 Medlem Reg.datum: Feb 2015 Ort: Dalarna Inlägg: 94	Hur mkt skulle det kosta isf. Har ni något cirkapris eller pristaxa? Mvh Erik Widenfalk

2015-02-11, 21:17	#246
Henrik Medlem Reg.datum: Aug 2001 Ort: Stockholm Inlägg: 420	Hur mycket RC-loket kostar att köpa? Den kostar 150 kronor

2015-02-12, 22:12	#247
Rc1-1007 Medlem Reg.datum: Feb 2015 Ort: Dalarna Inlägg: 94	jag har köpt och laddat ned den. men nu står det att varje fil är sönder och inte går att installera. blir så förbannad när man betalat och det inte funkar. någon som vet hur man fixar. TS 2015

2015-02-12, 22:23	#248
mikban Medlem Reg.datum: Jun 2009 Ort: Danmark Inlägg: 1 162	Hej Erik! Om någon ska ha en chans att hjälpa dig är det en bra början om du berättar vilket felmeddelande du har fått, om du kan ladda upp ett screenshot vore det också bra. Ingen anledning att bli förbannad, det funkar ju hos andra, så det lär säkerligen också gå att lösa hos dig

2015-02-12, 23:08	#249
Henrik Medlem Reg.datum: Aug 2001 Ort: Stockholm Inlägg: 420	Har du laddat ned denna fil också? http://www.klemund.de/RailSimulator/...S2013_v3.0.rar

2015-02-15, 14:22	#250
Rc1-1007 Medlem Reg.datum: Feb 2015 Ort: Dalarna Inlägg: 94	Verkar funka nu. Dock så har Rc5 6 7 fel hytt. Jag saknar också fler Rc2 och Rc3 i GC och SJ målningar ev. Rush rail. Annars hade det varit toppen! Någon som vet hur man ändrar nummerserier etc. Så att man kan få in t.ex 1166 och 1303 i spelet? Fantastiskt välgjorda modeller! :-)

2015-03-17, 15:28	#252
schweinchen Medlem Reg.datum: Sep 2014 Inlägg: 14	Ok, I get it to work. no worries

2015-03-27, 15:31	#255
schweinchen Medlem Reg.datum: Sep 2014 Inlägg: 14	I know that already about the engineer. I really don't want to sound unrespectful. I love that loco and I want to support your project. I also respect newS' work and are looking forward to his route. Nevertheless as a "customer" I have expectation and after the buy I'm disappointed about this product. After 6 years of production I expected a little more. If there were pictures of the cab to see before bying maybe I hadn't bought this one. At least the key facts should be right, I think. (max. speed)