Svenska 3D-Tåg - Forum - Visa ett inlägg - Ett aktuellt ämne ...credit, copyright mm

Banbyggarna · 2004-02-10, 23:39

Ursäkta dröjsmålet med read-me filen, men här är en som vi kan börja fila på.

----------------------------------------------------------------------

Modelname :
Release date:
Model by
Textures by

FOR DISTUBUTION AS FREEWARE FOR PERSONEL, NON COMMERCIAL USE ONLY

This model is not "public domain".

(You don´t have to ask for permission to repaint any of my models, you can also upload your repaints to any website of your choice. The only thing you must do is to include the original read-me file.)

( eller )

(If you whant to repaint any of my models you must ask for my permisson to do so (see mail-adress at the bottom) )

All repainted/modified versions must acknowledge the author/s of the
original work.

This model may not be distributed on CD without the author's prior written
agreement.

By downloading and/or using this model, you have agreed with these terms
and conditions of use.

USE AT YOUR OWN RISK - author not responsible for any damages arising
from the use of these files.

INSTALLATION
~~~~~~~~~~~~

This model can either be used as a static model in the scenery, or it
can be added to the car spawn, where it will drive along the roadways.

Before installing any models, I suggest you make a copy of all the files in the
\ROUTES\(your route) directory - failure to do this may result in a lengthy re-installation process.

Unzip all the files into a folder called Temp

Installing for first time
~~~~~~~~~~~~~~~~~~~~~~~~~
Copy or move the S and SD files into the route shapes directory:
( Normally - Program Files\Microsoft Games\Train Simulator\ROUTES\(your route)\SHAPES )

Copy or move the Acefiles into the route textures directory.
( Normally - Program Files\Microsoft Games\Train Simulator\ROUTES\(your route\TEXTURES )

To add vehicles to the car spawner
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Open the carspawn data file using WORDPAD.
( Normally - Program Files\Microsoft Games\Train Simulator\ROUTES\(your route)\carspawn.dat )

Add the following line of text somewhere in the existing list:

CarSpawnerItem( "xxxx_xx.s" 25)

Then update the number on the third line to the new total number of items listed.
Save and exit WORDPAD
You are now ready to add the model to the route using the Route Editor
supplied with Microsoft Train Simulator - the models will not be available in the simulator unless you do this.

This models can be found under the ' ex-Fordon' (or if non swedish "ex-vehicles") heading.in the route editor´s object selection window

Instructions on how to use the MSTS Route Editor may be found in tutorials on the Internet.

WARNING: It is not recommended that you delete these files once installed.

NAME
© 2004
name/name
mailadress
homepage:

--------------------------------------------------------------------

Läs igenom och ändra det som ni tycker ska ändras,sen ska vi ju naturligtvis ha en på svenska med

2004-02-10, 23:39	#14
Banbyggarna Medlem Reg.datum: Dec 2001 Ort: Sweden. Inlägg: 362	Ursäkta dröjsmålet med read-me filen, men här är en som vi kan börja fila på. ---------------------------------------------------------------------- Modelname : Release date: Model by Textures by FOR DISTUBUTION AS FREEWARE FOR PERSONEL, NON COMMERCIAL USE ONLY This model is not "public domain". (You don´t have to ask for permission to repaint any of my models, you can also upload your repaints to any website of your choice. The only thing you must do is to include the original read-me file.) ( eller ) (If you whant to repaint any of my models you must ask for my permisson to do so (see mail-adress at the bottom) ) All repainted/modified versions must acknowledge the author/s of the original work. This model may not be distributed on CD without the author's prior written agreement. By downloading and/or using this model, you have agreed with these terms and conditions of use. USE AT YOUR OWN RISK - author not responsible for any damages arising from the use of these files. INSTALLATION ~~~~~~~~~~~~ This model can either be used as a static model in the scenery, or it can be added to the car spawn, where it will drive along the roadways. Before installing any models, I suggest you make a copy of all the files in the \ROUTES\(your route) directory - failure to do this may result in a lengthy re-installation process. Unzip all the files into a folder called Temp Installing for first time ~~~~~~~~~~~~~~~~~~~~~~~~~ Copy or move the S and SD files into the route shapes directory: ( Normally - Program Files\Microsoft Games\Train Simulator\ROUTES\(your route)\SHAPES ) Copy or move the Acefiles into the route textures directory. ( Normally - Program Files\Microsoft Games\Train Simulator\ROUTES\(your route\TEXTURES ) To add vehicles to the car spawner ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Open the carspawn data file using WORDPAD. ( Normally - Program Files\Microsoft Games\Train Simulator\ROUTES\(your route)\carspawn.dat ) Add the following line of text somewhere in the existing list: CarSpawnerItem( "xxxx_xx.s" 25) Then update the number on the third line to the new total number of items listed. Save and exit WORDPAD You are now ready to add the model to the route using the Route Editor supplied with Microsoft Train Simulator - the models will not be available in the simulator unless you do this. This models can be found under the ' ex-Fordon' (or if non swedish "ex-vehicles") heading.in the route editor´s object selection window Instructions on how to use the MSTS Route Editor may be found in tutorials on the Internet. WARNING: It is not recommended that you delete these files once installed. NAME © 2004 name/name mailadress homepage: -------------------------------------------------------------------- Läs igenom och ändra det som ni tycker ska ändras,sen ska vi ju naturligtvis ha en på svenska med Banbyggarna © 2002-2004 www.banbyggarna.com