Scenarios för Malmbanan - Svenska 3D-Tåg

Yellow_wing · 2021-03-09, 15:30

Dear HGV

Your scenario where great!! Best thanks for your efforts!

In the scenario I have a problem.

I've got the order to drive to Rautas spar 2.
After the hold in Rautas I can't drive forward because the signal is red.
I have to wait until train GT9914 will pass.

But the switch in Rautas to direction Kiruna, is set on wrong side. The arriving train GT9914 will come to the same track (Spar 2) as our train (player train) is waiting and will crash together.
I've trieded multiply times to change the switch before crash. But I receive the message that the switch is blocked by GT9914.

May you could check this? Best thanks!

Kind regards
Yellow

Hgv · 2021-03-09, 15:59

I'm glad you like them!

Looks like you were unlucky there, as I didn't test drive that particular scenario.

I'll have a look and see if I can fix it.

Hgv · 2021-03-09, 17:24

Hmm, I can't even get to Rautas in that scenario. I get stuck in Bergfors where you should meet Gt 42604, but that train gets stuck just after leaving Kiruna.

I will investigate further...

Yellow_wing · 2021-03-09, 18:18

Thanks for short reply!
In Bergfors I was able to wait (a long time) until the train comes. So far it works on my system.

I will try this again, if possible tomorrow or on the week end.

Kind regards
Yellow

Hgv · 2021-03-09, 18:45

I'm running through the scenario now with all trains as AI trains. It's a bit easier as you can just let the sim run in the background without having to control any train yourself.

Waiting for the meet at Rautas now so we'll see how it goes...

Hgv · 2021-03-09, 19:45

I sent up a drone to have a look when the trains meet.

The switch at Rautas was laid correctly, so Gt 9914 passed on track 1 while the veteran train waited on track 2. I think unfortunately the dispatcher just does weird things sometimes!

A few things to consider:
- Make sure to be on time, as AI trains generally just look if the next signal block is free. If you're late, AI trains may move into track where you don't want them, or they can get stuck in the wrong position because they are not able to find a valid route.
- Never start a scenario directly from the route or scenario editor as this causes all sorts of weird problems with signalling and the dispatcher.

Yellow_wing · 2021-03-09, 22:15

Hello Hgv

thank you for your investigation!

I am sure that I arrived in Rautas absolutely on time. Probably 2 minutes earlier than the timetable.
But I will certainly try again.

Suggestion:
I would like to see a scenario by driving an iron train from Kiruna towards Narvik. May just the route Kiruna to Stenbacken. In such scenario it comes to different train crossing, like empty iron trains back from Narvik. Super it would also exist an overtaking passenger train at a station on the route. Would such a scenario be possible? I would be very happy with a such scenario, of course!

Thank you very much and have a nice evening
Yellow

2021-03-09, 15:30	#1
Yellow_wing Medlem Reg.datum: Oct 2012 Ort: Switzerland Inlägg: 12	Scenario: Veterantag Björkliden-Kiruna Dear HGV Your scenario where great!! Best thanks for your efforts! In the scenario I have a problem. I've got the order to drive to Rautas spar 2. After the hold in Rautas I can't drive forward because the signal is red. I have to wait until train GT9914 will pass. But the switch in Rautas to direction Kiruna, is set on wrong side. The arriving train GT9914 will come to the same track (Spar 2) as our train (player train) is waiting and will crash together. I've trieded multiply times to change the switch before crash. But I receive the message that the switch is blocked by GT9914. May you could check this? Best thanks! Kind regards Yellow

2021-03-09, 15:59	#2
Hgv Medlem Reg.datum: Apr 2007 Inlägg: 817	I'm glad you like them! Looks like you were unlucky there, as I didn't test drive that particular scenario. I'll have a look and see if I can fix it.

2021-03-09, 17:24	#3
Hgv Medlem Reg.datum: Apr 2007 Inlägg: 817	Hmm, I can't even get to Rautas in that scenario. I get stuck in Bergfors where you should meet Gt 42604, but that train gets stuck just after leaving Kiruna. I will investigate further...

2021-03-09, 18:18	#4
Yellow_wing Medlem Reg.datum: Oct 2012 Ort: Switzerland Inlägg: 12	Thanks for short reply! In Bergfors I was able to wait (a long time) until the train comes. So far it works on my system. I will try this again, if possible tomorrow or on the week end. Kind regards Yellow

2021-03-09, 18:45	#5
Hgv Medlem Reg.datum: Apr 2007 Inlägg: 817	I'm running through the scenario now with all trains as AI trains. It's a bit easier as you can just let the sim run in the background without having to control any train yourself. Waiting for the meet at Rautas now so we'll see how it goes...

2021-03-09, 22:15	#7
Yellow_wing Medlem Reg.datum: Oct 2012 Ort: Switzerland Inlägg: 12	Hello Hgv thank you for your investigation! I am sure that I arrived in Rautas absolutely on time. Probably 2 minutes earlier than the timetable. But I will certainly try again. Suggestion: I would like to see a scenario by driving an iron train from Kiruna towards Narvik. May just the route Kiruna to Stenbacken. In such scenario it comes to different train crossing, like empty iron trains back from Narvik. Super it would also exist an overtaking passenger train at a station on the route. Would such a scenario be possible? I would be very happy with a such scenario, of course! Thank you very much and have a nice evening Yellow